Skip to the content
Tarmac Driveway CostGet a quote
Browse

Tarmac Driveway Cost

What a new or resurfaced tarmac drive tends to cost in 2026, and a calculator that works from your own measurements.

A lane past houses and hedges on an autumn hillside

Work out a price for your drive

Measure the space, say what needs doing and where you live. The range moves as you type.

1. Measure the drive

= 36 m²

An odd shape? Split it into rectangles and add them up. A car space is often around 3 m by 6 m.

2. What is the job?
3. Where is the house?

Typical price for your drive

£2,150 to £3,600

A guide, not a quote.

Area
36 m²
Rate used
£60 to £100 per m²
Regional allowance
None

Typical 2026 UK prices. Ask whether a quote includes VAT. Not included: edging or a block border, drainage channels or a soakaway, and a dropped kerb, which your council prices separately.

Get a quote
Where the figures come from

Tarmac driveway prices by size

Most quotes are worked out per square metre, so size moves the price more than anything else. Here are four common sizes, outside London and the South East.

DriveNew driveReplacing an old surfaceResurfacing
18 m²3 m by 6 m: one car, nose in£1,100 to £1,800£1,250 to £2,250£350 to £800
36 m²6 m by 6 m: two cars side by side£2,150 to £3,600£2,500 to £4,500£700 to £1,600
50 m²6 m by 8.5 m: two cars and a path to the door£3,000 to £5,000£3,500 to £6,250£1,000 to £2,250
80 m²8 m by 10 m: a wide plot or three cars£4,800 to £8,000£5,600 to £10,000£1,600 to £3,600

Example plan sizes, not a standard. Small resurfacing jobs often carry a minimum charge, so the 18 m² figures are the least reliable in the table. Ask whether a quote includes VAT. A guide, not a quote.

Tarmac driveway cost per m²

A new drive tends to cost £60 to £100 per m². That covers digging out, a compacted stone sub-base and two layers of asphalt.

Taking an old drive out first

Breaking up concrete, slabs or worn tarmac and carting it away adds roughly £10 to £25 per m², which is how the middle column is built.

Resurfacing

A new top layer over a sound, level drive runs about £20 to £45 per m². If the base is moving, it won't last, and you are back to a new drive.

What you are paying for

You might think most of the money goes on the black stuff you see. In a lot of cases, it's the part you never see again that decides whether the drive lasts.

A new tarmac drive is dug out to firm ground, built back up with crushed stone that is rolled hard, then finished with two layers of asphalt: a coarser binder course and a finer surface course on top. Edging along the sides holds it all in place.

So when two quotes are far apart, compare the layers before the totals. Ask each firm to write down how deep they will dig, what goes in the sub-base and what edging they will use. A cheap price with a thin base tends to show itself in ruts and cracks within a few winters.

The other things that move a price:

  • Access. A machine that can't reach the drive means barrows and more labour hours.
  • The old surface. Concrete takes longer to break out than gravel, and every load has to be tipped.
  • Where the rain goes. A channel drain or a planted strip may be needed to keep you inside the front garden rule below.
  • Edging and borders. A block border looks smart and adds to the bill.

None of these are in the calculator, so treat its figure as the starting point.

Section through a tarmac driveFrom the top: asphalt surface course, asphalt binder course, compacted crushed stone sub-base, then the dug-out ground. An edging kerb set in concrete holds the side. The surface falls gently towards a drain or a planted area.Gentle fall towards a drain or a planted stripSurface coursefine asphalt you drive onBinder coursecoarser asphalt beneathSub-basecrushed stone, rolled hardDug-out groundfirm, cleared of topsoilLawn or bordertakes the run-offEdging kerb on concretestops the edge spreading
Not to scale. How deep each layer goes depends on your ground and what will park on it, so ask each contractor to write their layers and depths into the quote.

The 5 m² front garden rule

If your drive is in the front garden of a house in England, there's one planning rule that can change both the design and the price. Since 1 October 2008, surfacing more than 5 m² there only counts as permitted development if the surface is permeable, or the rain runs off onto a lawn or border inside your boundary. Otherwise you need planning permission.

In other words, an ordinary tarmac drive that tips water onto the pavement is the problem case. Porous asphalt, or a fall towards a planted strip, usually keeps you clear of an application. The rule covers houses, not flats.

Wales has its own version, and you can replace or repair up to 5 m² of existing hard surfacing there without using permeable materials. Scotland and Northern Ireland set their own rules, so check with your council before you sign anything.

How a tarmac drive gets laid

  1. Survey and written price

    The contractor measures, checks levels against the house and the road, and looks at where the water will go. The price should list the layers.

  2. Dig out and edge

    The old surface and soil come out down to firm ground. Edging is set in concrete along the sides before any stone goes in.

  3. Sub-base

    Crushed stone goes down in layers, each one rolled or plated hard. This is the part that stops the drive sinking.

  4. Binder and surface

    Hot asphalt is spread and rolled in two layers. Keep cars off until the contractor says it has cooled and hardened.

Tarmac driveway costs: your questions

What does an average tarmac drive cost?

For a new drive on a two-car space of about 36 m², a typical price is £2,150 to £3,600. A 50 m² drive usually lands between £3,000 and £5,000. Both figures include digging out and a stone sub-base, and both are guides rather than quotes.

Is tarmac cheaper than block paving or concrete?

Usually, yes. In one national set of installed prices, tarmac runs £60 to £90 per m², concrete £85 to £130 per m² and block paving £115 to £175 per m². The surface comparison has every row.

Why does the calculator add more for London and the South East?

Prices for building work tend to run higher there than in the rest of the UK. The calculator adds 15% to the bottom of the range and 25% to the top. That allowance is our judgement, not an official figure.

Do I need planning permission for a tarmac drive?

In England, only in one common case: you are surfacing more than 5 m² of a house's front garden with a surface that lets rain run off onto the road. Make it porous, or let it drain onto a lawn or border inside your boundary, and you usually don't (GOV.UK guidance). Wales has a similar rule.

Do I need permission for a dropped kerb?

Yes. Driving over the pavement needs a vehicle crossing, and that is approved by your highway authority, which is normally the council (Highways Act 1980, section 184). Fees and who does the work vary by council. See the dropped kerb guide.

What are the downsides of a tarmac drive?

Fresh tarmac can soften on very hot days, and tyres turned on the spot can scuff it while it is new. It also fades from deep black towards grey over the years. Good edging keeps the sides from crumbling and stops weeds creeping in along the margins.

Someone knocked offering leftover tarmac cheap. Should I say yes?

It's very important to say no on the doorstep. Council trading standards teams warn about this approach. If you have already signed at home, you usually have 14 days to cancel under the Consumer Contracts Regulations 2013. Our post on doorstep offers explains more.

Tell us about your drive

Three short steps: where the house is, what the drive needs, then how to reach you.

Tell us about the drive and we look for a surfacing contractor who covers your postcode. You hear the firm's name first, and nothing of yours reaches them until you agree. There is no charge to you. We are an independent introduction service and do not lay drives ourselves.

Step 1 of 3

Where is the drive?
Get a quote