Driveway Cost by Surface
Before you settle on tarmac, it's worth seeing what the alternatives cost. Here are five common surfaces, priced the same way so the rows compare fairly.
£60 to £90 per m²
Tarmac, installed, in the same national price set as the other surfaces below. This is a guide, not a quote.
Try the calculatorGet a quote
Driveway cost by surface
Typical installed prices per m², from one national set of 2026 figures. The 50 m² column is simple arithmetic on the same ranges.
| Surface | Per m² | 50 m² drive | Worth knowing |
|---|---|---|---|
| Gravel | £40 to £100 | £2,000 to £5,000 | Cheapest to lay; needs edging and topping up |
| Tarmac | £60 to £90 | £3,000 to £4,500 | Quick to lay, easy to patch, black or coloured |
| Resin | £70 to £120 | £3,500 to £6,000 | A smooth, decorative stone finish |
| Concrete | £85 to £130 | £4,250 to £6,500 | Plain or imprinted; joints needed against cracking |
| Block paving | £115 to £175 | £5,750 to £8,750 | Laid by hand; single blocks can be lifted and relaid |
A guide, not a quote. The tarmac range here is a little narrower than the one in our calculator, which allows more for digging out and the sub-base on a new drive.
Tarmac or block paving?
Block paving looks more finished to a lot of people, and it lets you lift and relay single blocks after a repair. But it costs a good deal more, because every block is laid by hand on a bed of sand.
If you like the look of blocks but not the bill, a tarmac drive with a block border is the usual middle ground. You get the framed edge for a fraction of the block area.
Tarmac or concrete?
Concrete is rigid, so it needs joints to control cracking, and repairs tend to show. Tarmac flexes a little, patches more easily and is usually cheaper per m² in these figures.
On the other hand, concrete doesn't soften in hot weather, which is worth thinking about if a heavy van or a caravan stands on the same spot all summer.
The cheapest drive
Gravel has the lowest starting price, at £40 to £100 per m². It needs edging to keep the stones in, regular topping up, and it isn't much fun with a pushchair or a wheelie bin.
Tarmac tends to be the cheapest of the sealed, hard surfaces. That's a large part of why so many British drives are laid with it. Put your own measurements into the tarmac driveway cost calculator for a closer figure.
The same rule for every surface
Whatever you choose, the front garden rule in England still applies. More than 5 m² of a house's front garden needs to be permeable or drain to a lawn or border inside the property, or you need planning permission (GOV.UK).
Loose gravel lets water through on its own. Tarmac and concrete can be made porous, or laid to fall onto a planted area. See permeable tarmac for the details.
Comparing driveway surfaces
How much does a new driveway cost?
It depends on the surface more than anything. Per m² installed, typical ranges run from £40 to £100 per m² for gravel to £115 to £175 per m² for block paving, with tarmac at £60 to £90 per m².
Is tarmac or block paving cheaper?
Tarmac, by a fair margin: £60 to £90 per m² against £115 to £175 per m² in the same set of prices. Blocks are laid by hand, which is where much of the difference goes.
Is it cheaper to tarmac or concrete a drive?
Tarmac is usually cheaper per m²: £60 to £90 per m² against £85 to £130 per m² for concrete.
Do these prices include digging out?
They are typical installed prices, so they assume a normal build-up for each surface. Breaking out an old drive, drainage and a dropped kerb are usually extra.
More on driveway prices
- Tarmac driveway costPrices by size and the calculator.
- Tarmac drivewaysFinishes, borders, the honest downsides and what a new drive involves.
- Resurfacing an old driveWhen a new top layer is enough, and when the base has to come up.
- Permeable tarmacPorous asphalt and the 5 m² front garden rule.
- Dropped kerb costWho gives permission, who does the work and why fees differ by council.
Get a quote for your new drive
Three short steps: where the house is, what the drive needs, then how to reach you.
Tell us about the drive and we look for a surfacing contractor who covers your postcode. You hear the firm's name first, and nothing of yours reaches them until you agree. There is no charge to you. We are an independent introduction service and do not lay drives ourselves.
Got it. Your enquiry is with us.
Here is what happens now:
- We look for a contractor who surfaces drives around your postcode, then get in touch with the firm's name.
- Your details stay with us until you say go ahead.
- The contractor comes out, measures the drive and gives you a written price. No mailing list, no follow-up sales emails.